|
| |
Back
LMS-11 SYSTEM CONFIGURATION | Up
Fire Controlman Volume 06-Digital Communications | Next
LMS-11 OPERATION AND DISPLAYS |
Figure 3-4.—The LMS-11 keyboard.
The analog-to-digital converter converts the
Link-11 audio signal into a digital signal for use by
the LMS-11. This digital signal is then transferred to
the computer, where the FFT converts it to a
frequency domain.
The Fast Fourier Transform
consists of a complex mathematical formula used to
determine the phase shift of a signal.
AUDIO INTERFACE UNIT.— The audio
interface unit connects the upper sideband (USB) and
lower sideband (LSB) audio signals from an HF radio
or the USB from a UHF radio to the LMS-11. The
audio signals are input to the analog-to-digital
converter of the control processing unit. The audio
interface unit does not add a load to the audio signal.
DUAL 3.5-INCH FLOPPY DISK DRIVE
UNIT.— The dual 3.5-inch floppy drive unit is used
to load the LMS-11 programs and to record Link-11
data. The disk drives use 788 Kbyte, double-sided,
double-density disks.
POWER CONTROL UNIT.— The power
control unit provides the control, distribution, and
conditioning of the 115 VAC input power.
Control/Display Group (CDG)
The CDG consists of a color graphics monitor and
a keyboard. The monitor displays operator-entered
data and system operation. The keyboard provides the
operator interface with the LMS-11.
COLOR DISPLAY MONITOR.— The color
display monitor is capable of displaying both
composite and RGB video. The computer generates
composite video during the start-up and testing of the
LMS-11. The RGB input with an external sync is
used for displaying graphics during normal LMS-11
operations.
The monitor is also equipped with a
speaker and audio input to provide the operator with
the capability of monitoring the Link-11 audio signal.
KEYBOARD.— The keyboard is mounted on a
tray under the monitor. Under the tray, there is a
storage slot for the LMS-11 technical manual. The
functional keys on the keyboard are color-coded to
3-8
|
