|
| |
Back
Chapter 5 Information Transfer System | Up
Electronics Technician Volume 08-Support Systems | Next
Figure 5-3.—Digital fire control switchboard (DFCS) |
Figure 5-1.—Manual switchboard.
Figure 5-2.-Sample manual switching
configuration.
subsystems as shown in figure 5-5. The switches also
can be used to interrupt or redirect signal flow
manually during maintenance operations.
Control and status signals are normally used to
initiate the switching action and monitor the status of
the switch positions. The CSCP generates control
signals to select the desired switch configuration on
the switchboard. Status signals from the switchboard
light indicators on the CSCP to display the current
switching configuration. In a casualty situation,
manual positioning of switches can be performed.
5-2
|
