Click Here to
Order this information in Print

Click Here to
Order this information on CD-ROM

Click Here to
Download this information in PDF Format

 

Click here to make tpub.com your Home Page

Page Title: TAG-OUT PROCEDURES
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Combat
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
USMC
   
Products
  Educational CD-ROM's
Printed Manuals
Downloadable Books

   
Back
CAUTION Tags (NAVSHIPS 9890/5)
Up
Electronics Technician, Volume 01-Safety
Next
SAFETY SHORTING PROBE

The instructions you write on the tag must state the specific  reason  the  tag  was  attached.  Do  not  use  a CAUTION tag if there is a chance someone could be hurt  or  equipment  could  be  damaged  when  operated using  normal  operating  procedures.  Use  a  DANGER tag  instead. DANGER Tag (NAVSHIPS 9890/8) A  DANGER  tag  is  a  red  -colored   tag   used   to prohibit  operation  of  equipment  that,  if  operated,  could jeopardize   the   safety   of   personnel   or   damage equipment. Under  NO circumstances  may  equipment be operated or removed when tagged with a DANGER tag (fig. 3-7). TAG-OUT  PROCEDURES Before you tag out apiece of equipment, make sure you  get  your  supervisor’s  permission.  If  the  equipment is  mission-critical,  you  may  even  need  your  division officer or department head’s permission to tag out the equipment. Now  go  to  the   Standard   Organization   and Regulations of the U.S. Navy,  (OPNAVINST    3120.32), and  read  chapter  6,  section  630.17.6,  “Standard  Tag- Out Procedures,” and return to this manual. PROTECTIVE  EQUIPMENT Wearing   the   correct   protective   equipment   is essential  to  all  persons  in  the  Navy.  It  is  especially important  for  the  safety  of  electronics  personnel.  In  the following paragraphs, we will discuss this equipment. ELECTRICAL  SAFETY  SHOES You may be issued a pair of electrical safety shoes when you report to your first duty station. You should wear them whenever you work on or around energized equipment for your own safety. Take care of your electrical safety shoes. You can clean and shine them just like regular safety shoes. And when they become worn out or damaged, turn them into your supply petty officer for a new pair. Electrical  safety  shoes  do  not  have  any  exposed metal parts like you might find on regular safety shoes. They  do  have  special  non-conducting  soles  designed  to protect you from electric shock. The soles are rated to insulate you from a maximum of 600 volts. Electrical  safety  shoes  are  stocked  in  the  Naval Supply   System   under   the   National   Stock   Number (NSN) 8430-00-611-XXXX. The “XXXX” part of the NSN specifies the shoe size. Figure  3-7.—DANGER Tag (red in color). 3-12

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing