Click Here to
Order this information in Print

Click Here to
Order this information on CD-ROM

Click Here to
Download this information in PDF Format

 

Click here to make tpub.com your Home Page

Page Title: PILE CONSTRUCTION
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Combat
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
USMC
   
Products
  Educational CD-ROM's
Printed Manuals
Downloadable Books

   
Back
FOUNDATIONS AND PILES
Up
Engineering Aid 1 - Advanced Structural engineering guide book
Next
Bearing Piles

Figure 1-7.—wall and column foundations. Figure 1-8.—Plan and section of a typical spread footing. ground. The foundation wall, contrary to its name, may be a column or a pedestal instead of a wall. But, when it is a wall, it forms what is known as a continuous foundation. Figure 1-7 shows common types of wall and column foundations. The continuous foundation is the type of foundation that is most commonly used for small buildings. The size of the footing and the thickness of the foundation wall are specified on the basis of the type of soil at the site. Most building codes also require that the bottom of the footing  be  horizontal  and  that  any  slopes  be compensated for by stepping the bottom of the footing. Another  type  of  foundation foundation. A grade beam is a is the grade-beam reinforced   concrete Figure 1-9.—Plan and section of a mat foundation. beam located at grade level around the entire perimeter of a building, and it is supported by a series of concrete piers extending into undisturbed soil. The building loads are supported by the grade beam, which distributes the load to the piers. The piers then distribute the load to the foundation  bed A spread foundation,  such as the one shown in figure 1-8, is often required where heavy concentrated loads from columns, girders, or roof trusses are located. This type of foundation may be located under isolated columns  or  at  intervals  along  a  wall  where  the concentrated  loads  occur.  Spread  footings  are  generally reinforced with steel. They may be flat, stepped, or sloped, such as shown in figure 1-7. Figure 1-9 shows the plan and section of a typical mat foundation. In this type of foundation, a heavily reinforced  concrete  slab  extends  under  the  entire building and distributes the total building load over the entire site. This minimizes problems created by unequal settlement when the subsoil conditions are uneven. The mat  foundation  is  often  referred  to  as  a  floating foundation. PILE  CONSTRUCTION Piles  include  many  different  types  and  materials. The following text discusses the more common types. 1-6

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing