|
| |
Back
Figure 9-11 .—Control levers. | Up
Equipment Operator Basic - Beginning construction equipment operators manual | Next
Loader Operation |
Figure 9-18.—“V” method of loading.
Figure 9-15.—Dozer blade tilt positions.
Figure 9-16.—Multipurpose bucket set in “clamshell” position.
blade. This is done by tilting the blade forward or
backward, as shown in figure 9-15.
To use the multipurpose bucket as a clamshell, you
open the clamshell until the clamshell indicator is at the
bottom (fig. 9-16). Then you tilt the bucket forward all
the way.
NOTE: Multipurpose bucket position indicators
differ, depending on the manufacturer. Read the
operator’s manual for the type loader you are assigned
to operate.
Figure 9-17.—Ramp construction for belowground excavation.
9-8
|
