CABLE ASSEMBLY (TARGET LAMP) 2A1A2A11W19 7 -9 INPUT CODE: DCDCTL

TM 11-6625-3081-23 7-9. CABLE ASSEMBLY (TARGET LAMP) 2A1A2A11W19 7 -9 INPUT CODE: DCDCTL a. DESCRIPTION This module tests the ability of cable assembly (target lamp) 2A1A2A11W19 to respond to on and off commands. The target lamp is programmed on and shutter assembly 2A1A2A2 opens. The operator observes the lamp by looking through the open shutter and if lamp is on, presses [YES] or if lamp is off, presses [NO] on the AN/USM-410 VDT. If NO is pressed, a prompt is displayed at the completion of the test. The target lamp is then programmed off. The operator observes the lamp through the open shutter and if lamp is on, presses [YES] or if lamp is off, presses [NO] on the AN/USM-410 VDT. If YES is pressed, a prompt is displayed. b. REPLACEMENT PROCEDURE REFERENCE The following list provides a cross reference of replacement items to replacement procedures. The item column identifies the item to be replaced by reference designation and part number. The reference column identifies the procedural paragraph used to perform the replacement action. The VDT screen will display the proper sequence of repair/replace actions. Item Reference (Ref Des/Part No.) (Para No.) 2A1/13082800-59 5-9 2A2A4A1K9/13083063 5-33 2A1A2A11W19/13082266 (LAMP) 5-21 2A2A6XX (SLOT 409)/69331B 2-49 2A2A7A4K5/13081572 2-34 7-45