|
| |
Back
SEGMENT 7 | Up
TM-11-6625-3081-23-5 Electronic Equipment Test Facility TADS/PNVS Augmentation Equipment Manual | Next
B MIRROR SELF TEST FAILURE |
TM 11-6625-3081-23
7-8. B MIRROR
7 - 8
INPUT CODE: DCBMIR
a. DESCRIPTION
This module tests the ability of the B mirror to respond to commands for both
positions 1 thru 3.
The B mirror is programmed to position 1 and the motor status
checked.
A prompt is displayed at the completion of the test if the motor position is in
error.
The B mirror is then programmed from position 1 to position 2 and motor status
checked.
A prompt is displayed at the completion of the test if the motor status is in
error.
The B mirror is then programmed from position 2 to position 3 and motor status
checked.
A prompt is displayed if the motor status is in error.
b. REPLACEMENT PROCEDURE REFERENCE
The following list provides a cross reference of replacement items to
replacement procedures.
The item column identifies the item to be replaced by
reference designation and part number.
The reference column identifies the
procedural paragraph used to perform the replacement action. The VDT screen will
display the proper sequence of repair/replace actions.
Item
Reference
(Ref Des/Part No.)
(Para No.)
2A1/13082800-59
2A1A2A1W48/13082263-69
2A1A2A1W49/13082263-79
2A1A2A1W50/13082263-89
2A2A6XX (SLOT 401)/13083412
2A2A6XX (SLOT 407)/69331B
2A2A7A6A1/13082741
2A2A7A6A2/13082735
2A2A7A6A3/13082732
5-9
5-20
5-20
5-20
2-49
2-49
2-51
2-51
2-51
7-42
|
