|
| |
Back
REMOVAL (cont) | Up
TM-11-6625-3081-23-4 Electronic Equipment Test Facility TADS/PNVS Augmentation Equipment Manual | Next
INSTALLATION |
TM 11-6625-3081-23
5-6. BASE ASSEMBLY REPAIR (cont)
5-6
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
On isolator (16), tag and
disconnect two blue tubes
(17) from tee fitting (18)
and natural tube (19) from
opposite fitting (20).
Tag and disconnect blue tube
(21) from fitting (22) on
isolator (16).
Remove piston plate (23)
from isolator (16).
Remove tubing clamps as
necessary.
Mark a line around bottom of
isolator (16). Replacement
isolator must be installed
in same position.
Remove two bolts (24), lock-
washers (25), and isolator
(16).
Remove four screws (26) and
valve assembly (27) from
isolator (16).
Remove fitting (22) from
defective isolator (16) and
clean teflon tape residue
from threads.
5-24
|
