|
| |
Back
REMOVAL (cont) | Up
TM-11-6625-3081-23-4 Electronic Equipment Test Facility TADS/PNVS Augmentation Equipment Manual | Next
INSTALLATION |
TM 11-6625-3081-23
5-6. BASE ASSEMBLY REPAIR (cont)
5-6
DO NOT PLACE HANDS OR FEET UNDER BASE
WHILE USING JACK. INJURY COULD
RESULT.
CAUTION
Be sure jacks are raised at the same
time to avoid damaging equipment.
(8) Using an assistant, slowly
raise base no higher than
4 inches with jacks.
Operate jacks at same time.
(9) Place hardwood blocks (15)
under base, do not relieve
weight of base from jacks
(12).
Remove jack handles
(14) from jacks (12).
(10) Remove piston plate (16)
from isolator (17).
(11) On isolator (17), tag and
disconnect one orange tube
(18) from tee fitting (19)
and two natural tubes (20)
from opposite tee
fitting (21).
(12) Tag and disconnect orange
tube (22) from isolator
fitting (23).
5-13
|
