|
| |
Back
REMOVAL | Up
TM-11-6625-3081-23-4 Electronic Equipment Test Facility TADS/PNVS Augmentation Equipment Manual | Next
BLOWER ASSEMBLY 1A6 OR 1A12 REPAIR |
TM 11-6625-3081-23
4-4. AC CONTROL PANEL ASSEMBLY 1A5 REPAIR
CAUTION
g.
Carefully extend AC CONTROL panel
assembly away from cabinet for
access to terminal board (14).
h.
Loosen two knurled nuts (15) and
remove cover assembly (16).
i.
Remove 14 nuts (17), lockwashers
(18), and washers (19).
j.
Tag and remove attaching wires
(13).
k.
Remove three terminal links
(20).
l.
Remove three screws (21), lock-
washers (22), washers (23), ter-
minal board (14), and nuts (24).
INSTALLATION
m.
Install three screws (21), lock-
washers (22), washers (23), ter-
minal board (14), and nuts (24).
n.
Inspect terminal links (20) for
damage and replace, if neces-
sary.
o.
Install three terminal links as
shown.
p.
position tagged wires (13) on
terminal board in the reverse
order of removal.
q.
Install 14 nuts (17), lockwashers
(18), and washers (19).
r.
Install cover assembly (16) and
two knurled nuts (15).
(cont)
4-4
Do not put any stress on wiring
connected to AC CONTROL panel assem-
bly.
Damage to wire connections
could occur.
END OF TASK
Change 9
4-7
|
