|
| |
Back
REMOVAL | Up
TM-11-6625-3081-23-4 Electronic Equipment Test Facility TADS/PNVS Augmentation Equipment Manual | Next
INSTALLATION (cont) |
TM 11-6625-3081-23
5-6.
BASE ASSEMBLY REPAIR (cont)
5-6
INSTALLATION
(9) Remove two screws (12) and
valve cover (13) from
replacement valve (14) and
install on defective
valve (9).
(10) Install valve cover (11)
with adjusting arm on
replacement valve (14) with
two screws (12).
(11) Wrap teflon tape around
threads of fittings
(3 and 5).
(12) Install tee fittings (3 and
5) into replacement valve
(14).
ISOPROPYL ALCOHOL
FLAMMABLE, TOXIC, IRRITATING. CAN
CAUSE BREATHING PROBLEMS, EYE
DAMAGE.
DON’T:
USE NEAR FLAMES OR SPARKS,
LET IT GET IN EYES, OR BREATHE
VAPORS.
DO:
USE IN WELL-VENTILATED AREA,
CLOSE CONTAINERS WHEN NOT USING.
WEAR ACID-TYPE SAFETY GOGGLES.
IF IT CONTACTS EYES, WASH EYES
WITH RUNNING WATER. GET MEDICAL
HELP AT ONCE.
IF YOU EXPERIENCE ANY BREATHING
PROBLEMS, GET TO FRESH AIR AT
ONCE.
(13) Clean screws (8) and mating
holes in isolator (1) with
isopropyl alcohol.
(14) Apply sealing compound
primer to threads, allow
to dry.
5-35
|
