Remarks

TM 11-4940-480-14

numbers in this column coincide with the numbers used

field operating conditions. This time includes prepara-

in the tools and equipment column of the MAC. The

tion time, troubleshooting time, and quality assurance/

numbers indicate the applicable tool or test equipment

quality control time in addition to the time required to

for the maintenance functions.

perform the specific tasks identified for the mainte-

b. Maintenance Category. The codes in this column

nance functions authorized in the maintenance alloca-

indicate the maintenance category allocated the tool or

tion chart. Subcolumns of column 4 are as follows:

test equipment.

C--Operator/Crew

c. Nomenclature. This column lists the noun name

O--Organizational

and nomenclature of the tools and test equipment re-

F--Direct Support

quired to perform the maintenance functions.

H--General Support

D--Depot

d. Natinal/NATO Stock Number. This column lists

e. Column 5, Tools and Equipment. Column 5 spec-

the National/NATO stock number of the specific tool

ifies by code, those common tool sets (not individual

or test equipment,

tools) and special tools, test, and support equipment re-

e. Tool Number. This column lists the manufac-

quired to perform the designated function.

turer's part number of the tool followed by the Federal

f. Column 6, Remarks. Column 6 contains an

Supply Code for manufacturers (5-digit) in parentheses.

alphabetic code which leads to the remark in section IV,

D-5. Remarks (See IV).

Remarks, which is pertinent to the item opposite the

particular code.

a. Reference Code. This code refers to the ap-

propriate item in section 11, column 6.

D-4. Tool and Test Equipment Re-

b. Remarks. This column provides the required ex-

quirements (See Ill)

planatory information necessary to clarify items appear-

a. Tool or Test Equipment Reference Code. The

ing in section II.

(Next printed page is D-3)

D-2