Description of Shelter

11-4940-480-14

1-8. Description of Shelter

TPX-50. Following is a list of items required. Refer to

appendix A for their related technical manuals.

The shelter is an Electronic Equipment Shelter S-280B/

a. TO OIS.

G, modified for AN/TSM-126A application. Mainte-

(1) Tool Kit, Electronic Equipment TK-100/G

nance and repair procedures are covered in TB 750-240.

(NSN 5180-00-605-0079).

The shelter is modified as described below.

(2) Tool Kit, Electronic Equipment TK-105/G

a. Exterior. The front of the shelter contains an ad-

(NSN 5180-00-610-8177).

justable louvered panel. The louvers are adjustable by a

(3) Repair Kit, Printed Wire Board MK-772/U

handle which can be locked in place to prevent wind

(NSN 5999-00-757-7042).

gusts from closing them. The door is located at the rear

(4) Head Set H-216/U (NSN 5965-00-892-3353).

of the shelter. The air conditioner and heater fuel intake

(5) Heat Gun Master Appliances HG-501L (NSN

line are located at the left of the door (fig. l-l). The

4940-00-561-1002) .

heater exhaust cap (deep fording cap) is located at the

(6) Kit Tool: Master Deluxe; General Cement

roadside, rear (fig. 1-1). The power entrance connector,

Company Type 8283, 25 Alignment Tools (NSN 5120-

input power reset button, and air conditioner circuit

00-949-8368).

breaker are located at the rear, near the curbside (fig.

b. Test Equipment.

1-1).

(1) Oscilloscope AN/USM-281A (NSN 6625-00-

b. Interior. The pullout drawers are secured in place

228-2201).

during transportation by the lift-to-release mechanisms

(2) Multimeter AN/PSM-6B (NSN 6625-00-957-

on the drawers. The swing-open doors are held in place

4374).

by lock-type latches.

(3) Voltmeter, Electronic ME-202B/U (NSN 6625-

(1) Front (fig. 1-4). The forward working area, ex-

00-972-4046).

haust fan, schematic holder, and forward work area

( 4 ) Wattmeter AN/URM-98A (NSN 6625-00-

lamp are located at the front of the shelter. Test

566-4990) .

Facilities Set AN/TPM-24 (V) 3 is located under the

(5) Attenuator, Fixed, 10 DB CN-1024/U (NSN

forward area workbench.

5985-00-721-0255).

(2) Curbside (fig. 1-5). The curbside contains

(6) Power Supply PP-2953A/U (NSN 6130-00-

various rack-mounted test equipments, a work area,

985-7899).

toolkit, work area lamp, emergency light, and a first aid

( 7 ) Test Set, Transistor TS-1836C/U (NSN

kit. It also contains storage cabinets and drawers, in-

6625-00-159-2263) .

cluding a cable reel under the workbench.

(8) Test Facilities Set AN/TPM-24(V)3 (NSN

(3) Roadside (fig. 1-3). The roadside contains the

6625-00-133-7865).

AN/TPX-50 hot-mockup, additional test equipments,

(9) Interrogator Set AN/TPX-50(NSN 5859-00-

and storage drawers. On the floor is a field safe, and

782-5296).

Power Supply PP-2953 (*)/U, which provides the 28-

(10) Adapter, Rf Pickup Probe. (Fabricated with

vdc power source for the AN/TPX50.

Adapter UG-625B/U (NSN 5935-00-552-7660) and

(4) Rear (fig. 1-6). The circuit breakers, filter

No. 16 AWG bar wire, for use with Generator, Sweep

panel, temperature and power controls, and fire ex-

Signal AN/USM-203A. See figure 5-2, TM 11-6625-

403-15-1 for additional details.)

tinguisher are located at the rear curbside of the shelter.

The space heater and other minor components are

(11) Radar Test Set AN/TPM-25A (NSN 6625-

located at the rear roadside of the shelter (fig. 1-7).

01-045-9988).

1-2