MOUNTING ADAPTERS

23. MOUNTING ADAPTERS

The mounting adapters (23 and 27, fig. 5) are

used for the starter or actuator to be mounted on. The

adapter is attached to the starter torque tester frame

with two socket head screws (24 or 28). The adapter

has pins or studs which the starter or actuator mounts

on. The starter or actuator is held in position on the

adapter by two quick-acting, self-positioning mounting

clamps (7, fig. 2). The mounting clamps are actuated

by cam shafts (5) and have adjusting screws to insure

that the best locking position on the cam shafts is

utilized. The mounting clamps are locked in position or

released by means of the two cam shafts.

Figure 13. Drive Couplings