IDENTIFICATION

setting (holding torque) of all starters incorporating

5. DIFFERENCES IN MODELS

standard mounting pads, as well as starters equipped

with the new quick-disconnect features for mounting.

This manual covers only type B-1 starter torque

The tester is also equipped with suitable accessories to

tester, part No. RT320-200. No known unit differences

be used for testing electrical actuators and retraction

exist for the design covered by this manual.

motors.

6. TABULATED DATA

4. IDENTIFICATION

a. General:

The nameplate (fig. 3) for the starter torque

Manufacturer .

Greer Hydraulics, Inc.,

tester is located on the lower right-hand side of

Los Angeles, Calif.

Part No .........

RT320-200

Type .............

Prony Brake, Type B-1

Dimensions ..

20 in. wide x 24 in.

high x 36 in. long

Weight .........

400 lb (estimated)

b. Torquemeters:

Manufacturer

Greer Hydraulics, Inc.,

Los Angeles, Calif.

Part No ........

DT320-293, DT320-

290, DT320-213

Range ..........

0 - 150 foot-pounds

0 - 500 foot-pounds

0 - 1500 foot-pounds

c. Tachometer:

Part No ......... .

870C

Range...........

0 - 1500 rpm

Figure 3. Nameplate

d. Brake Shoe Assembly:

Part No ........

H-2-353

tester base. It identifies the manufacturer, giving the

Range ..........

Up to 7 horsepower

type, part number, model number, and serial number.

absorption

e. Brake Pressure Control Assembly:

Part No .........

BT320-265

Type .............

Screw