Special Information

TM 11-6625-599-12, C4

NOTE

tional group, subfunctional group, or an assembly.

When a stock-numbered item is requisi-

A5-4. Special Information

tioned, the repair part received may have

The illustrations in this appendix are identical to

a different part number than the part

those published in TM 114625-59945. Only those

being replaced.

parts assigned the third position SMR maintenance

e. Federal Supply Code for Manufacturer

code `` C" or `` O" are listed in the tabular listing,

(FSCM). The FSCM is a 5-digit numeric code listed

therefore, there may be a break in the item number

in SB 708-42 which is used to identify the manufac-

sequence. Only illustrations containing organiza-

turer, distributor, or Government agency, etc.

tional authorized items appear in this appendix.

f. Description. Indicates the Federal item name

A5-5. How to Locate Repair Parts

and, if required, a minimum description to identify

When National stock number or part number is

the item.

unknown:

g. Unit of Measure (U/M). Indicates the standard

a. First. Find the illustration covering the func-

of the basic quantity of the listed item as used in

tional group or subgroup to which the repair part

performing the actual maintenance function. This

belongs.

measure is expressed by a two+character alphabeti-

b. Second. Identify the repair part on the illustra-

cal abbreviation (e.g., ea, in, pr, etc.). When the unit

tion and note the illustration figure and item num-

of measure differs from the unit of issue, the lowest

ber of the repair part.

unit of issue that will satisfy the required units of

c. Third. Using the Repair Parts Listing, find the

measure will be requisitioned.

figure and item number noted on the illustration.

h. Quantity Incorporated in Unit. Indicates the

A5-6. Abbreviations

quantity of the item used in the breakout shown on

the illustration figure, which is prepared for a func-

Not applicable.

(Next printed page is 8)