Section I: INTRODUCTION

SECTION I

INTRODUCTION

1-1. Scope

Code

Explanation

PE -- Support equipment procured and stocked for

This manual lists repair parts required for the per-

initial issue or outfitting to specified main-

formance of organizational maintenance of the TS-

tenance repair activities.

1836/U. The PCCN for the TS-1836/U is GTEACF

PF Support equipment which will not be stocked

for all models.

but which will be centrally procured on de-

1-2. General

mand.

Item procured and stocked to provide for sus-

This repair parts list is divided into the following

tained support for the life of the equipment.

sections:

It is applied to an item peculiar to the equip-

a. Prescribed Load Allowance (PLA) -- Section II.

Not applicable.

ment which because of probable discon-

b. Repair Parts List--Section III. A list of repair

tinuance or shutdown of production facili-

parts authorized for the performance of maintenance

ties would prove uneconomical to reproduce

at the organizational level. This repair parts list is

at a later time.

arranged in alphabetical order.

KD An item of depot overhaul/repair kit and not

c. Special Tools, Test and Support Equipment --

purchased separately. Depot kit defined as

Section IV. Not applicable.

a kit that provides items required at the

d. Index--Federal Stock Number and Reference

time of overhaul or repair.

Number Cross-Reference to Figure and Item Num-

An item of a maintenance kit and not pur-

ber Section V. A list, in ascending numerical se-

chased separately. Maintenance kit defined

quence, of all Federal stock numbers appearing in

as a kit that provides an item that can be re-

the listings, followed by a list, in alphameric se-

placed at organizational or direct support

quence, of all reference numbers appearing in the

or general support levels of maintenance.

listings. Federal stock number and reference num-

KB Item included in both a depot overhaul/repair

bers are cross-referenced to each illustration figure

kit and a maintenance kit.

and item number or reference designation appear-

MO -- Item to be manufactured or fabricated at or-

ance.

ganizational level.

1-3. Explanation of Columns

MF Item to be manufactured or fabricated at di-

rect support maintenance level.

The following provides an explanation of columns

MH --Item to be manufactured or fabricated at gen-

in the tabular lists--

eral support maintenance level.

a. Source, Maintenance, and Recoverability Codes

MD -- Item to be manufactured or fabricated at de-

(SMR).

pot maintenance level.

(1) Source code. Indicates the manner of ac-

AO Item to be assembled at organizational level.

quiring support items for maintenance, repair, or

AF Item to be assembled at direct support main-

overhaul of end items. Source codes are--

tenance level.

Explanation

Code

AH -- Item to be assembled at general support main-

PA Item procured and stocked for anticipated or

tenance level.

known usage.

AD -- Item to be assembled at depot maintenance

PB -- Item procured and stocked for insurance pur-

level.

poses because essentiality dictates that a

minimum quantity be available in the sup-

XA Item is not procured or stocked because the

ply systems.

requirements for the item will result in the

Item procured and stocked and which other-

replacement of the next higher assembly.

wise would be coded PA except that it is

XB -- Item is not procured or stocked. If not avail-

deteriorative in nature.

able through salvage, requisition.

Support item, excluding support equipment,

XC Installation drawing, diagram instruction

procured for initial issue or outfitting and

sheet, field service drawing, that is identi-

stocked only for subsequent or additional

fied by manufacturers' part number.

initial issues or outfitting. Not subject

XD Support items can be requisitioned with jus-

to automatic replenishment.

tification.