Section I. INTRODUCTION

SECTION I

INTRODUCTION

1-1. Scope

Explanation

Code

PE -- Support equipment procured and stocked for

This manual lists repair parts and special tools

initial issue or outfitting to specified main-

required for the performance of organizational

tenance repair activities.

maintenance of the ME-202/U. The PCCN for the

PF -- Support equipment which will not be stocked

ME-202/U is GTEAEC for all models.

but which will be centrally procured on

1-2. General

demand.

PG -- Item procured and stocked to provide for

This repair parts and special tools list is divided into

sustained support for the life of the

the following sections:

equipment. It is applied to an item

a. Prescribed Load Allowance (PLA) - Section II.

peculiar to the equipment which because

Not applicable.

b. Repair Parts List - Section III. A list of repair

of probable discontinuance or shutdown of

production facilities would prove un-

parts authorized for the performance of mainte-

economical to reproduce at a later time.

nance at the organizational level. This repair parts

KD -- An item of depot overhaul/repair kit and not

list is arranged in alphabetical order.

Support

and

Test

Tools,

purchased separately. Depot kit defined

Special

as a kit that provides items required at the

Equipment - Section IV. Not applicable.

time of overhaul or repair.

d. Index Federal Stock Number and Reference

KF -- An item of a maintenance kit and not

Number Cross-Reference to Figure and Item

purchased separately. Maintenance kit

Number - Section V. A list, in ascending numerical

defined as a kit that provides an item that

sequence, of all Federal stock numbers appearing in

can be replaced at organizational or direct

the listings, followed by a list, in alphameric

support or general support levels of

sequence, of all reference numbers appearing in the

maintenance.

listings. Federal stock number and reference num-

KB -- Item included in both a depot over-

bers are cross-referenced to each illustration figure

haul/repair kit and a maintenance kit.

and item number or reference designation appear-

MO -- Item to be manufactured or fabricated at

ance.

organizational level.

1-3. Explanation of Columns

MF -- Item to be manufactured or fabricated at

direct support maintenance level.

The following provides an explanation of columns in

MH -- Item to be manufactured or fabricated at

the tabular lists --

a. Source, Maintenance, and Recoverability Codes

general support maintenance level.

MD-- Item to be manufactured or fabricated at

(SMR).

depot maintenance level.

(1) Source code. Indicates the manner of acquir-

AO -- Item to be assembled at organizational level.

ing support items for maintenance, repair, or

AF -- Item to be assembled at direct support

overhaul of end items. Source codes are --

maintenance level.

Explanation

Code

AH -- Item to be assembled at general support

PA Item procured and stocked for anticipated or

maintenance level.

known usage.

AD -- Item to be assembled at depot maintenance

PB -- Item procured and stocked for insurance

level.

purposes because essentiality dictates

XA -- Item is not procured or stocked because the

that a minimum quantity be available in

requirements for the item will result in

the supply systems.

the replacement of the next higher as-

PC -- Item procured and stocked and which

sembly.

otherwise would be coded PA except that.

XB -- Item is not procured or stocked. If not

it is deteriorative in nature.

available through salvage, requisition.

PD Support item, excluding support equipment,

XC -- Installation drawing, diagram instruction

procured for initial issue or outfitting and

sheet, field service drawing, that is iden-

stocked only for subsequent or additional

tified by manufacturers' part number.

initial issues or outfittings. Not subject to

XD -- Support items can be requisitioned with

automatic replenishment.

justification.