Section VI. SHIPPING INSTRUCTIONS

SHIPPING INSTRUCTIONS

6.1 If it becomes necessary to ship the instrument, the following

steps should be followed:

a. Wrap the instrument with heavy wrapping paper and seal

the seams with gummed tape. Place in fibreboard carton

large enough to permit three inches of soft packing

material between instrument and sides of box.

b. Separately wrap with heavy paper and pad the correct

serial number probe and accessories and include with

voltmeter.

c. Alternatively Boonton Electronics will provide an

appropriate shipping container and packing materials

at nominal cost. These may be obtained by writing

to the Sales Department, Boonton Electronics Corporation,

Route 287 at Smith Rd., Parsippany, N. J. 07054.

AN/URM-145