Figure 2-4 Rack Mount Installation

TM 11-6625-444-14-2

(15) Position the voltmeter in the equip-

(12) Install the outer right slide assembly in-

ment rack and attach in place as shown in figure

side the right wall of the equipment rack frame.

2-4. It will be necessary to trip the latches on

both the right and left voltmeter slide members

(13) To attach the left chassis-slide assem-

to permit inserting the voltmeter completely into

bly repeat steps (9) through (12) except orient

the equipment rack.

the scalloped corner of the inner left slide mem-

ber so that it faces the upper front corner of the

voltmeter left side.

(16) The balance of this procedure is the

same as the procedure given for installation of

(14) Install the outer left slide assembly in-

the portable configuration.

side the left wall of the equipment rack frame.

Figure 2-4 Rack Mount Installation

2-5/2-6