Shutdown and Storage Procedures

of poor filtering in the equipment being tested.

e. Turn off the transistorized equipment

before switching the battery eliminator on or off.

The transient voltages, created by switching the

battery eliminator on and off, may exceed the

punch-through rating of the transistors. Make

sure that a normal load (such as a speaker for a

receiver) is connected to the transistorized equip-

ment before applying power.

f. Refer to the individual technical manual for

the equipment being tested.

2-8. Shutdown and Storage Procedures

a. Shutdown Procedure.

(1) Remove all test leads and accessories

from the jacks of the TS-352B/U and place them

in the test leads and accessories compartment

(2) Place the FUNCTION switch in the AC

VOLTS position.

b. Storage.

(1) The original packing material may be

used for repacking.

CAUTION

Do not leave batteries in battery com-

partment for an extended period of

time. Corrosion of the batteries could

lead to severe damage to the equipment.