Preliminary Operating Procedures

paragraph 3-6 and 3-7. Haphazard trou-

bleshooting can damage the TS-352B/U.

2-3. Preliminary Operating Procedures

a. Battery Installation. To install the batteries

in the multimeter (fig. 2-2), place the multimeter

face down on a flat firm surface and proceed as

follows:

(1) Loosen the retaining screws that hold

the cover in place by turning the screws counter-

clockwise.

(2) Lift up and remove the cover. Place the

cover so that the connection diagram on the in-

side of the cover (fig. 2-3) can be easily referred

to in order to make the necessary connections.

(3) Connect three Dry Batteries BA-31 in

series; use the connectors supplied. Install the

batteries in the battery compartment, as indi-

cated by the connection diagram on the battery

compartment cover.

(4) Place Dry Battery BA-30 in the compart-

ment provided so the spring makes contact with

the bottom of the battery.

(5) Place the battery compartment cover on

the bottom of the multimeter.

(6) Align the retaining screws with their

proper holes.

(7) Hold the cover to prevent it from shift-

ing, and secure the cover in position by turning

2-4