Appendix II: MAINTENANCE ALLOCATION

MAINTENANCE ALLOCATION

1. Scope

a. This appendix assigns maintenance functions and repair

o p e r a t i o n s to be performed by the lowest appropriate mainte-

n a n c e echelon. It also specifies the tools and other equipment

authorized at each echelon to perform the assigned maintenance

functions.

b. Columns in the maintenance allocation chart are as follows:

(1) Part or component. This column shows only the no-

menclature or standard item name. Additional descrip-

tive data are included only where clarification is nec-

essary to identify the part. Components and parts com-

p r i s i n g a major end item are listed alphabetically.

A s s e m b l i e s and subassemblies are in alphabetical se-

quence with their components listed alphabetically im-

mediately below the assembly listing.

(2) Maintenance function. This column indicates the various

maintenance functions allocated to the echelon capable

of performing the operations.

(a) Service. To clean, to preserve, and to replenish fuel

and lubricants.

(b) Inspect. To verify serviceability and to detect incipient

electrical or mechanical failure by scrutiny.

(c) Test. To verify serviceability and to detect incipient

e l e c t r i c a l or mechanical failure by use of special

equipment such as gages, meters, and other test de-

vices.

(d) Replace. To substitute service assemblies, subassem-

blies, and parts for unserviceable components.

(e) Repair. To restore an item to serviceable condition

through correction of a specific failure or unserviceable

c o n d i t i o n . This function includes but is not limited

to, inspecting, cleaning, preserving, adjusting, replace

ing, welding, riveting, and straightening.

(f) Rebuild. To restore an item to a standard as near as

possible to original or new condition in appearance,

performance, and life expectancy. This is accomplished