Rear Panel

TM 11-6625-3060-10

CONTROLS AND INDICATORS

Rear Panel

Function

Fuseholder

A fuseholder is located on the mar panel containing either a 0.20 A, 115

V, or a 0.10 A, 220 V, Bussman MDL SLO-BLO fuse.

Input ac Power

Switch that is set to 115 or 230 (volts) according to the avalable power

source.

115-230 switch

The proper fuse size is required.

RECORDER Output Terminals

A dc voltage proportional to the front panel indicator reading is available

these terminals. Fs output = + 10 V; output resistance = 9 k ohms.

Adapter Storage Clips (3)

Three storage clips are located at the rear panel for securing accessories

and adapters which are not in use.

Printed Circuit Edge Connector

A card edge connector is mounted at the rear of the ME-526AIUSM.

This safety requirement symbol directs that it is necessary to refer to the

instruction manual. In this case it Is recommended that reference be

made to the instruction manual when connecting the ME-526A/USM

to the proper power source. It must be verified that the right fuse is

installed for the power available and that the 10 A -0.20 A, 50400 Hz

switch on the rear panel is set to the applicable operating voltage of

230 or 115 volts ac.

2-3