CHAPTER 2. SERVICE UPON RECEIPT AND INSTALLATION

TM 11-6625-298-14

CHAPTER 2

SERVICE UPON RECEIPT AND INSTALLATION

Section I. SERVICE UPON RECEIPT OF MATERIEL

2-1. Unpacking.

(5) Open the inner corrugated carton, and

remove the ohmmeter in its carrying case, the two

a. Refer to figure 2-1, and follow the steps below

test leads, and the technical publication.

when unpacking the ohmmeter.

(6) Open the carrying case, remove the ohm-

(1) Break and fold back the metal straps.

meter and desiccant bags and check the

(2) Remove the nails from the top of the

equipment , as specified in paragraph 2-2.

wooden packing crate with a nail-puller, and

b. The ohmmeter may be received as a domestic

remove the top. Do not attempt to pry off the

shipment, without a wooden crate. The unpacking

sides or top; such action may damage the

instructions given in a above apply also to un-

equipment.

packing domestic shipments. If heavy wrapping

(3) Remove the packaged equipment and cut

the tape that seals the carton.

paper has been used in lieu of cartons, remove it

carefully and check the contents as in paragraph 2-

(4) Cut the barrier material along the seam,

and remove the inner corrugated carton.

2-1