Section V MAINTENANCE PROCEDURES

TM 11-6625-291-14/TO 33A1-7-23-1

Section V MAINTENANCE PROCEDURES

Para

Page

Subject

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .

Touchup Painting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Replacement Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-8. OVERVIEW.

This section provides maintenance procedures for the output meter at the organizational

maintenance level.

The maintenance procedures for the output meter are organized into the following groups;

Inspection

Cleaning

Touchup Painting

Replacement Procedures

4-9. INSPECTION.

The only inspection procedures at the organizational maintenance level are the PMCS. The PMCS

must be performed at the interval listed. See chapter 5, section lV for the PMCS procedures.

4-10. CLEANING.

Clean the output meter with a soft Iint-free cloth. lt may be necessary to clean meter glass

using soap and a dampened cloth. The metal parts of the output meter can be cleaned using

trichiorotrifiuoroethane.

Adequate ventilation should be provided while using trichlorotrifluoroethane. Prolonged

breathing of vapor should be avoided. The solvent should not be used near heat or open

flame; the products of decomposition are toxic and irritating. Since trichlorotrifluorwthane

dissolves natural oils, prolonged contact with skin should be avoided. When necessary, use

gloves which the solvent cannot penetrate. If the solvent is taken internally, consult a physi-

cian immediately.

CAUTION

Do not clean meter glass with trichlorotrifluoroethane. This can damage the output

meter.

4-10