MEASUREMENT OF OUTPUT POWER USING TS-585B/U, TS-585C/U, OR TS-585D/U.

TM 11-6625-291-14/TO 33A1-7-23-1

2-11. MEASUREMENT OF OUTPUT POWER USING TS-585B/U, TS-585C/U, OR TS-585D/U.

This task covers:

Measurement

INITIAL SETUP

Tools

Personnel Required

None

One operator

Materials/Parts

Equipment Condition

None

Equipment under test off

ACTION

REMARKS

ITEM

LOCATION

MEASUREMENT

CAUTION

The output meter is not fused. Do not connect the output

meter to equipment rated more than 5 watts.

Test leads (1) and

1. Output Meter

Connect test leads to binding posts.

binding posts (2)

TS-585B/U

TS-585C/U, or

TS-585D/U

NOTE

If equipment under test is grounded, connect test lead from

binding post (marked G) to ground of equipment under test.

Impedance control (3)

Set Impedance control knob to characteristic

impedance setting of circuit being tested.

NOTE

If the characteristic impedance is unknown, see paragraph

2-13 to find the characteristic impedance of the circuit

being tested.

2-18