Chapter 4. Operator and Organizational Maintenance

TM 11-6625-2724-12

CHAPTER 4

OPERATOR

AND

ORGANIZATIONAL

MAINTENANCE

Section I. GENERAL

maintenance at the operator or organizational

4-1. Tools and Test Equipment

maintenance levels.

The only tools required for Operator or organizational

maintenance is a .050 hex head (Allen) wrench.

4-3. Lubrication Instructions

No lubrication of the ME-202C/U is required.

4-2. Special Tools and Test Equipment

No special tools or test equipment is required for

Section II. OPERATOR'S AND ORGANIZATIONAL

PREVENTIVE MAINTENANCE CHECKS AND SERVICES

4-4. General

or assIemblies of the ME-202C/U is confined to depot

maintenance. The only authorized operator or

The operator and organizational maintenance ac-

organizational maintenance is the performance of

tions are described in this section.

preventive maintenance checks and services, and

4-5. Scope of Operator's and Organizational

replacement of fuse, knobs, or lamp. Operator

Maintenance

maintenance is listed in table 4-1 and organizational

Due to the specialized test equipment required for

maintenance is listed in table 4-2.

calibration, maintenance or repair of internal parts

Table 4-1. Operator Preventive Maintenance Checks and Services

TO BE INSPECTED

4-1