Location of Repair Parts

TM 11-6625-2616-24P

TM 11-6625-524-14

A--Item requires special handling or condem-

Operator,

Organiza-

n a t i o n procedures because of specific

tional, Direct Support,

reasons (i.e., precious metal content,

General Support and

high dollar value, critical material or

Depot

Maintenance

h a z a r d o u s material). Refer to approp-

Manual: Digital Volt-

riate manuals/directives for specific

meter AN/GSM64A

instructions.

1 - 5 . Location of Repair Parts

b . Federal Stock Number. T h i s c o l u m n i n d i -

cates the Federal stock number assigned to the

a. When a Federal stock number or reference

number is unknown:

item and will be used for requisitioning

( 1 ) Find the illustration covering the repair

purposes.

part.

c. Description. T h i s c o l u m n i n d i c a t e s t h e

F e d e r a l item name and a minimum description

(2) Identify the repair part on the illustra-

t i o n and note the reference designation of the

r e q u i r e d to identify the item. The last line indi-

repair part.

cates the reference number followed by the

(3) When the reference designation is de-

applicable Federal Supply Code for Manufac-

termined, refer to the reference designation

turer (FSCM) in parentheses. The FSCM is used

i n d e x (sec IV). The reference designations are

as an element in item identification to designate

listed in alphanumeric ascending order and

manufacturer or distributor or Government

are cross-references to the page number on

agency, etc., and is identified in SB 708-42.

w h i c h they appear in the repair parts lists (sec

d. Unit of Measure (U/M). A t w o - c h a r a c t e r

II). Refer to the page number noted in the index

alphabetic abbreviation indicating the amount

a n d locate the item in the repair parts list (col.

or quantity of the item upon which the allo-

10b).

wances are based; e.g. ft, ea, pr, etc.

b. W h e n t h e F e d e r a l s t o c k n u m b e r o r r e f e r -

e. Quantity Incorporated in Unit. This col-

e n c e number is known:

u m n indicates the quantity of the item used in

( 1 ) Use the Federal stock number and re-

an assembly. Subsequent appearances of the

ference number index (sec III) and find the per-

s a m e item in the same assembly are indicated

tinent Federal stock number or reference

by the letters "REF."

n u m b e r . This index is in ascending FSN sequ-

f. 15-Day Organizational Maintenance. N o t

ence, followed by a list of reference numbers in

applicable.

ascending

alphanumeric

sequence,

cross-

g . Allowances (30-Dag DS/GS Maintenance, 1

- r e f e r e n c e d to the illustration figure number and

Y e a r Per Equipment (Contingency), and Depot

reference designation.

M a i n t e n a n c e . Items authorized for requisition

( 2 ) Use the repair parts list (sec II) to find

a s required are identified by an asterisk in the

the repair part and the illustration figure

a l l o w a n c e column. Subsequent appearances of

n u m b e r and reference designation referenced in

t h e same item will have the letters "REF."

t h e FSN and reference number index (see III).

h. Illustrations. This column is divided as fol-

lows:

1-6. Recommendations for Maintenance Pub-

(1) F i g u r e n u m b e r . I n d i c a t e s t h e f i g u r e

l i c a t i o n Improvements

n u m b e r of the illustration in which the item is

The reporting of errors, omissions, and recom-

shown.

mendations for improving this publication by

(2) I t e m n u m b e r o r r e f e r e n c e d e s i g n a t i o n .

the individual user is encouraged. Reports

Indicates the reference designation used to

should be submitted on DA Form 2028 (Recom-

identify the item in the illustration.

mended Changes to Publications and Blank

1-4. Special Information

F o r m s ) and forwarded direct to Commander, US

Army Electronics Command, ATTN: AMSEL-

The following publication pertains to the AN/

M A - S , Fort Monmouth, NJ 07703.

GSM-64A.

1-3