CLAY MONITOR TEST PROCEDURE

MICRO-SEPAROMETER MARK V DELUXE OPERATION MANUAL 14.0 CLAY MONITOR TEST PROCEDURE 14.1 The DELUXE MICRO-SEPAROMETER can be used for the Clay Monitor Test in the following manner. 14.2 Prepare the DELUXE MICRO-SEPAROMETER as stated in section 7.0. 14.3 Momentarily depress the "ON" switch. The annunciator lamps located on switches A through G in the TEST SELECT section will then be scanning for your selection. ' Depress switch "F" to initiate the standard automatic program for Clay Monitor testing. 14.4 The annunciator lamps in the SYRINGE section will indicate that manual control can be executed on the syringe drive mechanism. Depress the "UP" pushbutton. This will move the syringe mechanism to the upper limit. The annunciator lamp in the PROGRAM section will indicate the turbidimeter can be utilized on demand. Depressing the "READ" switch will turn on the turbidimeter and the adjust capability of the turbidimeter. 14.5 Insert sample into syringe and attach to syringe drive mechanism. 14.6 Momentarily depressing the "DOWN" pushbutton will cause the syringe drive to dispense the fuel sample in approximately 15 seconds. COPYRIGHT 1984 EMCEE ELECTRONICS, INC. REVISION DATE: FEBRUARY 12, 1987 PAGE 16