ACCESSORIES FOR 310

ACCESSORIES FOR 310 Model 10 Clamp-on AC Ammeter- Cat No 60211 Ranges, 0-6-12-30-60-120-300 Model 101 - Line Separator-Cat. No 60-218 - Divides two conductor cords direct or increases Model 10 sensitivity 10x and 20x. Model 379 Carrying Case - Cat No 10-1456 For Model 310 and Model 10 combination, plus Model 101. Model 311 Lead - Cat. No 79-41642" long lead to separate Model 10 from 310 unit for easy reading In awkward spots. (now shown) Model 369 Carrying Case - Cat. No 10-1258. MODEL 10 INSTRUCTIONS AC CLAMP-ON AMMETER ADAPTER This adapter allows measurement of AC current with a VOM It is attached to the VOM with an extension lead. It may also be attached to the top of the 310 series VOMs directly as shown on Page 14. SPECIFICATIONS Ranges: 0-6, 12, 30, 60, 120, 300 AC Amperes. Accuracy See Model 10 Instruction Sheet. Frequency: See Model 10 Instruction Sheet. VOM Range and Sensitivity: 3 AC Volts at 5,000 ohms/volt. AC CURRENT MEASUREMENTS Using the adapter on top of Triplett Model 310 series VOMs - 1 Rotate the lever on the bottom of the adapter until it points straight out (See Figure 1). 2 Install the adapter on the top of the VOM Rotate the lever back against the adapter. 11