CALIBRATION PROCEDURE FOR HYDRAULIC SYSTEMS TEST SET BOEING, MODELS 114G1038-31 AND 114G1038-71

SUPERSEDED COPY DATED 15 JANUARY 1986

DEPARTMENT OF THE ARMY TECHNICAL BULLETIN

CALIBRATION PROCEDURE FOR

HYDRAULIC SYSTEMS TEST SET

BOEING, MODELS

114G1038-31 AND 114G1038-71

Headquarters, Department of the Army, Washington, DC

30 December 1991

Approved for public release, distribution is unlimited.

REPORTING OF ERRORS

You can help improve this publication by calling attention to errors and by

recommending improvements and stating your reasons for the recommendations.

Your letter or DA Form 2028, Recommended Changes to Publications, should be

mailed directly to Commander, U. S. Army Aviation and Missile Command, ATTN:

AMSAM-TMD-EP, Redstone Arsenal, AL 35898-5400. You may also contact this

office electronically. E-mail address is tmde-e@redstone.army.mil. FAX to DSN 788-

2313 (256-842-2313). A reply will be furnished directly to you

Paragraph

Page

SECTION

IDENTIFICATION AND DESCRIPTION

Test instrument identification .........................

Forms, records, and reports .............................

Calibration description.....................................

EQUIPMENT REQUIREMENTS

Equipment required .........................................

Accessories required.........................................

CALIBRATION PROCESS

Preliminary instructions

Equipment setup ..............................................

Pressure gage ...................................................

Frequency meter ..............................................

Pyrometer .........................................................

Final procedure ................................................

______________

*This bulletin supersedes TB 9-4920-452-35, 15 January 1986, including all changes.