 |
|||
|
|
|||
|
Page Title:
Figure 10. Dc and ac current - equipment setup |
|
||
| ||||||||||
|
|
  TB 9-4910-556-35
(2) Press and release STEP key on SC. SC will display:
DC CURRENT
Range: 0 to +2 A dc
Then: ±0.000 A dc
(3) Set calibrator for 1.5 A dc output.
(4) Set calibrator to OPERATE mode.
(5) Set communicator will indicate between 1.46 and 1.53 A dc.
(6) Set calibrator to STANDBY mode.
b. Adjustments. No adjustments can be made.
30. Ac Current
a. Performance Check
(1) Connect equipment as shown in figure 10.
(2) Press and release STEP key on SC. SC will display:
AC CURRENT
Range: 0 to 1.14 A rms
Then: ±0.000 A ac.
(3) Set calibrator for 1 A ac, 400 Hz output.
CHANGE 1 25
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals