CALIBRATION PROCEDURE FOR VOLTAGE DIVIDER, BECKMAN, MODELS T-10-A SERIES AND TA-1001; ESI MODELS DP211, DP311, DV411, AND DV412; AND GENERAL RADIO MODEL 1454A

Change 2

DEPARTMENT OF THE ARMY TECHNICAL BULLETIN

CALIBRATION PROCEDURE FOR

VOLTAGE DIVIDER,

BECKMAN, MODELS T-10-A SERIES AND TA-1001;

ESI MODELS DP211, DP311, DV411, AND DV412; AND

GENERAL RADIO MODEL 1454A

Headquarters, Department of the Army, Washington, DC

31 March 1981

TB 9-1430-201-50, 25 June 1973, is changed as follows:

Page 5, table 5. In last line under Voltage Divider Final Indication in Min column, 09990

is changed to read 09900.

Page 6, figure 1. Reverse leads B1 and B2 (at test instrument only) from voltage standard

A4 to test instrument.

Page 7, figure 2. Change connectors labeled GND on A4 and A5 to GRD.

Change

connectors labels GND on A3 to CASE.

By Order of the Secretary of the Army:

E. C. MEYER

General, United States Army

Chief of Staff

Official:

J. C. PENNINGTON

Major General, United States Army

The Adjutant General

Distribution:

To be distributed in accordance with DA Form 12-34C, Block No. 319, requirements for

calibration procedures publications.

US GOVERNMENT PRINTING OFFICE: 1981-740 031: 2466

__________

*This change supersedes Change 1, 6 Mar 1974.

PIN NO: 015570-001