SECTION II EQUIPMENT REQUIREMENTS

TB 554290-429-35

SECTION II

EQUIPMENT REQUIREMENTS

Equipment Required.

Table 2 identifies the specific equipment

to be used in this calibration procedure.

This equipment is issued

with Secondary Transfer Calibration Standards Set, AN/GSM-286.

Alternate items may be used by the calibrating activity when the

equipment listed in table 2 is not available.

The items selected

must be verified to perform satisfactorily prior to use and must

bear evidence of current calibration.

The equipment must meet or

exceed the minimum use specifications listed in table 2.

The

accuracies listed in table 2 provide a four-to-one ratio between

the standard and TI.

Accessories Required.

The accessories listed in table 3 are

issued as indicated in paragraph 4 above and are used in this

calibration procedure.

When necessary, these items may be

substituted by equivalent items, unless specifically prohibited.

Special Equipment Required.

Table 4 identifies special equip-

ment required for the calibration procedure.