Table 5. D.C. Milliamp

TB 55-4920-346-34

Table 5. D.C. Milliamp

Meter Calibrator Indication (MA)

Test Instrument Indication (MA)

Min

Max

200

175

225

300

275

325

400

375

425

500

475

525

12. Simulators (Temp and Sensor).

a. Performance Check. (Figure 6 and Figure 7)

(1) Connect equipment as shown in figure 6. Check test leads resistance and record.

(2) Set the TEMPERATURE CONTROL SIMULATOR to 00100.0 on the test instrument.

(3) The voltmeter (A2) shall indicate within the limits specified in table 6, after substracting the lead resistance

recorded in (1) above.

(4) Repeat the above check for each of the test instrument TEMPERATURE CONTROL settings listed in table 6.

(5) Disconnect test leads from TP-31 and 32 and connect to TP-39 and 40.

(6) Set the SENSOR SIMULATOR to 00100.0 on the test instrument.

(7) Repeat steps (3) through 4 above, using SENSOR CONTROL settings in table 6.

b. Adjustments. No adjustments can be made.

Figure 6. DC Milliamp Equipment Setup

Change 1