Figure 2. Location of TI controls and instruments used during calibration.

Page Title: Figure 2. Location of TI controls and instruments used during calibration.
Back | Up | Next

Web
www.tpub.com

Home

Information Categories

....

Back
Table 3. Accessories Required

Up
TB-3-6665-315-50 Calibration Procedure for Indicator Resistance Inhilation and Exhaltion Q213 Manual

Next
Figure 3. AIR FLOW gage performance check, equipment setup

Figure 2. Location of TI controls and instruments used during calibration.

(3) Adjust the AIR FLOW VALVE until the

AIR FLOW Gage. a. Performance Check.

AIR FLOW gage (fig. 2) indicates 85. The flowmeter

(1) Connect the test equipment as shown in

(A1) must indicate between 225 and 235.

(4) Release the INHALE-EXHALE switch.

(2) Set and hold the INHALE-EXHALE switch

b. Adjustments. No adjustments can be made.

to EXHALE.