SECTION III. PRELIMINARY OPERATIONS

Table 3. Accessories Required - Continued

Table 3. Accessories Required

Item

Common name

Description and part number

Item

Description and part number

Common name

conductor cable Double pole,

AWG

Lead ¹

20 wire cut in 12 inch

double throw switch 18 connec-

lengths

tion terminal board.

Must measure from zero to 60 sec-

Stopwatch

Test cable No. 2

Test cable No. 2 consists of 30 con-

ends in seconds

ductor cable 4 feet long Plug Ben-

Assemble special test cable No. 1 in

Test cable No. 1

dix PT06E-18-32S (RS) 30 con-

accordance with figure 1. Cable

nection terminal board.

consists of plug Bendix

PT06A-14-15S (SR) four feet 10

¹ 16 required.

SECTION III. PRELIMINARY OPERATIONS

6. Preliminary Instructions. a. The instructions out-

prefixed with A, see table 2, and prefix B, see table 3.

WARNING

lined in this section are preparatory to the calibration

HIGH VOLTAGE is used during the perform-

process. Personnel should become familiar with the entire

bulletin before beginning the calibration.

ance of this calibration. DEATH ON CON-

TACT may result if personnel fail to observe

b. Items of equipment used in this procedure are

precautions.

referenced with the text by common name and item iden-

7. Assembly of test cables B3 and B4. Fabricate the test

tification number as listed in tables 2 and 3. For the iden-

tification of equipment referenced by item numbers

cables as described in table 3 and figure 1.