Table 1B. "None required" is superseded as follows:

Paragraph 10b(4), line 3. The following is added: "(R)."

Page 11, paragraph 11b(1), LINE 5. The following is added: "Ground pin E of J1 on

Bearing Indicator."

Page 12, subparagraph 11B(5), line 9. The following is added: "(R)."

Paragraph 12 is superseded as follows:

12. In accordance with TM 38-750, annotate and affix DA Label 80 (US Army Calibrated

Instrument). When the unit under test receives limited or special calibration, annotate and

affix DA Label 163 (US Army Limited or Special Calibration). When the unit under test

cannot be adjusted within tolerance, annotate and affix DA Form 2417 (US Army

Calibration System Rejected Instrument).

By Order of the Secretary of the Army:

BERNARD W. ROGERS

General, United States Army

Chief of Staff

Official:

J. C. PENNINGTON

Major General, United States Army

The Adjutant General

Distribution:

To be distributed in accordance with DA Form 12-36A, Section II, calibration

requirements for AN/ARM-93.

US GOVERNMENT PRINTING OFFICE: 1979-665-012/1565