TB 11-6625 -3263-25
Items Replaced and Removed from Field Continued
Designator
LIN
NSN
Condition Code
TS-433A
H02231
E25, E100
Items Potentially Replaceable
Designator
LIN
NSN
Condition Code
106 TYPE 2
NONE
6625-00-455-5855
P2, I1, E25
107
NONE
P2, I1, E25
3310A
NONE
P2, I1, E25
651A
NONE
P2, I1, E25
AN/USM-256
NONE
P2, E25
AN/USM-264
NONE
6625-00-935-4214
P2, E25
CC: SG-763/U
J56367
P3, E25
AN/USM-358
NONE
P2, E25
F55A
NONE
6625-01-057-5836
P2, I1, E25
FG-501
NONE
P2, I1, E25
SG-106/U
NONE
P2, E25
SG-1102/U
NONE
6625-00-148-8289
P2, E25
SG-1128
V82615
P3, E7, E25
SG-15/PCM
J54878
T3, E25, P3, E83
SG-502
NONE
P2, I1, E25
SG-578/U
NONE
P2, E25
SG-632A/U
J56282
6625-00-493-3023
E25
SG-769/U
NONE
6625-00-257-7689
P2, E25
SG-770/U
NONE
P2, E25
SG-772/G
NONE
6625-00-935-1330
P2, E25
SG-970/U
NONE
P2, E25
SG-984/U
NONE
P2, E25
Condition Codes
Code
Condition
E7
The SG-1128 has balanced output impedance, 135- and 600-ohm output
impedances and has a calibrated output attenuator. The TEMOD item
does not have any of these features. The SG-1128 will be purged by the
TEMOD item where these features are not required. The only known user
that requires these features is the Information Systems Command.
This item is being replaced by the SG-1171. The SG -1288 is also capable
E25
of replacing subject item. Units with SG-1171 will retain it as a standard
LCC A item, while additional requirements will be satisfied by the SG-
1288.
This item is on the replacement list of AN/USM-485, SG -1288 and
E83
SG-1171. If item is used for telephone testing applications, replace with
AN/USM-485. If used for general purpose applications, replace with
SG-1288 or SG-1171 (see condition code E25).
4-116