Final Procedure

TB 11-6625-2937-35

b. Adjustment.

reinstall covers on control-interface unit.

b. In accordance with TM 38-750, annotate

(1) Adjust power supply output voltage

and affix DA Label 80 (US Army Calibrated Instrument).

adjustment (ADJ POT) for a voltage indication

When the equipment receives limited

of +28.0+0.2 V on the multimeter.

or special calibration, annotate and affix DA Label

(2) Set POWER ON/OFF switch to OFF.

163 (US Army Limited or Special Calibration).

(3) Remove multimeter from terminals 3

When the equipment cannot be adjusted within

(+) and 4 (-) of power supply AlPS3.

tolerance, annotate and affix DA Form 2417 (US

Army Calibration System Rejected Instrument).

13. Final Procedure

a. Deenergize and disconnect all equipment and