SECTION I INTRODUCTION AND DESCRIPTION

TB 11-6625-2715-50

SECTION I

INTRODUCTION AND DESCRIPTION

b. Specifications.

1-1. Purpose and Scope. This bulletin provides

information for the periodic certification of Ammeter,

Ranges ..................................0 to 1.5 amperes

Simpson, model 2100. It is to be used by personnel

0 to 3 amperes

trained and qualified in the use of calibration equipment.

0 to 30 amperes

Since calibration personnel are trained and qualified in

Accuracy ................................2% of full scale value.

the usage of test and measuring equipment, detailed

instructions for operation and use of these equipments

are not contained in this bulletin.

c. Calibration.

1-2. Reporting of Technical Bulletin Improvements.

Interval ...................................In accordance with

The

reporting

errors,

omissions,

and

TB 43-180

recommendations for improving of this bulletin is

Time required .........................1 hour

authorized and encouraged. Submit reports on DA Form

Technique ..............................DC Low Frequency

2028 (Recommended Changes to Publications and

Blank Forms) directly to:

Commander, US Army

1-4. General Instructions. a. Calibration Reporting.

Electronics Command, ATTN:

AMSEL-MA-Q, Fort

During the performance of this procedure annotate DA

Monmouth, NJ 07703.

Form 2416 (Calibration Data Card) in accordance with

1-3. Descriptive Data. a. Identification.

TM 38-750.

Nomenclature.........................Ammeter (Multi range)

b. Test Instrument. Throughout this procedure the

Manufacturer ..........................Simpson Electric Co.

Test Instrument will be identified as TI (Test Instrument).

Model number ........................2100

Size .......................................5 in. x 5 in. x 6 in.

(approx.)