WARNING

TM 1-6625-735-14

WARNING

Personnel performing operations, procedures, and practices which are included or implied in this technical

manual shall observe the following warnings. Disregard of these warnings and precautionary information can

cause serious injury or death.

CONSUMABLE MATERIALS

Observe all cautions and warnings on the containers when using consumables. When applicable, wear

necessary protective gear during handling and use. If a consumable is flammable or explosive, MAKE

SURE consumable and its vapors are kept away from heat, spark, and flame. MAKE SURE equipment

is properly grounded and firefighting equipment is readily available prior to use.

The synchro transmitter control is a precision instrument that contains a slip clutch and an 18 to 1

reduction mechanism between the outer (fine) dial and the inner (coarse) dial. Use care to avoid over

torquing this mechanism which will result in activation of the slip clutch and loss of calibration

between inner and outer dials. Always use outer dial when adjusting to a specific degrees setting. If it

is necessary to use inner dial, MAKE SURE to turn dial using slow, smooth, continuous motion.

SAFETY STEPS TO FOLLOW IF SOMEONE IS THE VICTIM OF ELECTRICAL SHOCK

Do Not Try To Pull Or Grab The Individual.

If Possible, Turn Off The Electrical Power.

If You Cannot Turn Off The Electrical Power, Pull, Push, Or Lift The Person To Safety Using A

Dry Wooden Pole Or A Dry Rope Or Some Other Insulating Material.

Send For Help As Soon As Possible.

After The Injured Person Is Free Of Contact With The Source Of Electrical Shock, Move The

Person A Short Distance Away And Immediately Start Resuscitation.

a/(b Blank)