TM-10-5411-207-140001.gif
TM-10-5411-207-140002.gif
TM-10-5411-207-140003.gif
TM-10-5411-207-140004.gif
TM-10-5411-207-140005.gif

Tm-10-5411-207-14

• Chapter 1 Introduction
• Preparation For Shipment And Storage
• Figure 1-1. Major Shelter Components
• Figure 1-2. Shelter Marking
• Figure 1-3. Instruction And Warning Plates.
• Chapter 2 Operating Instructions
• Explanation Of Columns
• Table 2-1. Operator Maintenance Checks And Services
• Section Ii. Operation Under Usual Conditions
• Chapter 3 Unit Maintenance Instruction
• Service Upon Receipt Of Materiel (Cont).
• Figure 3-1. Lifting And Loading Shelter.
• Service Upon Receipt Of Materiel
• Figure 3-2. Securing Shelter On Truck
• Table 3-1. Troubleshooting.
• Table 3-1. Troubleshooting (Cont).
• Section V. Maintenance Instructions
• General (Cont).
• Table 3-2. Blind Rivets.
• Figure 3-4. Installing Blind Rivets.
• Figure 3-5. Removing Blind Rivets.
• Figure 3-6. Rivnuts (Threaded Inserts).
• Figure 3-7. Installing Rivnuts.
• Chapter 1 Introduction
• Preparation For Shipment And Storage
• Figure 1-1. Major Shelter Components
• Figure 1-2. Shelter Marking
• Figure 1-3. Instruction And Warning Plates.
• Chapter 2 Operating Instructions
• Explanation Of Columns
• Table 2-1. Operator Maintenance Checks And Services
• Section Ii. Operation Under Usual Conditions
• Chapter 3 Unit Maintenance Instruction
• Service Upon Receipt Of Materiel (Cont).
• Figure 3-1. Lifting And Loading Shelter.
• Service Upon Receipt Of Materiel
• Figure 3-2. Securing Shelter On Truck
• Table 3-1. Troubleshooting.
• Table 3-1. Troubleshooting (Cont).
• Section V. Maintenance Instructions
• General (Cont).
• Table 3-2. Blind Rivets.
• Figure 3-4. Installing Blind Rivets.
• Figure 3-5. Removing Blind Rivets.
• Figure 3-6. Rivnuts (Threaded Inserts).
• Figure 3-7. Installing Rivnuts.
• Figure 3-7. Installing Rivnuts.
• Figure 3-8. Removing Rivnuts.
• Figure 3-9. Repair Of Turning Rivnut
• General Repair Procedures
• Shelter Assembly
• Overall Shelter Assembly
• Figure 3-10. Overall Shelter Assembly Inspection.
• Drip Molding (Above Door).
• Hand Hold (Roof)
• Tm-10-5411-207-14_42
• T-Latch Assembly
• Drain Plug
• Repair.
• Plates
• Figure 3-15. Data Plate Replacement.
• Hinge Assembly
• Figure 3-16. Hinge Assembly Replacement.
• Door Assembly
• Adjust
• Figure 3-17.Typical Locations For Door Gasket Testing
• Figure 3-19. Door Assembly Replacement
• Disassemble.
• Install
• Figure 3-20. Door Assembly Maintenance.
• Emergency Exit Panel Assembly.
• Figure 3-21. Typical Locations For Emergency Exit Panel Gasket Testing
• Figure 3-22. Emergency Exit Panel Assembly And (Shielded) Rfi/Emi Filter Replacement
• Emergency Exit Panel Assembly (Cont)
• Install
• Door Latch Assembly.
• Door Latch Assembly (Cont).
• Assemble
• Figure 3-23. Door Latch Replacement
• Keeper Assembly
• Figure 3-24. Keeper Assembly Removal.
• Door Brace Assembly
• Figure 3-25. Door Brace Assembly Removal
• Figure 3-26. Door Brace Assembly Maintenance
• Recessed Step Pan Assembly
• Figure 3-27. Recessed Step Pan Assembly Replacement.
• Towing Eye Assembly
• Lifting And Tiedown Eye Assembly
• Skid Assembly.
• Figure 3-30. Skid Assembly Repair
• Repair.
• Hold Down Assembly
• Figure 3-31. Hold Down Assembly Repair.
• Touch-Up Painting
• Figure 3-33. Rail Tiedoww
• Chapter 4 Direct Support Maintenance Instructions
• Table 4-1. Troubleshooting
• Delamination Repair.
• Figure 4-1. Skin Panel Delamination Repair.
• Delamination Repair (Cont).
• Delamination Repair (Cont).
• Repair Of Small Or Shallow Dent
• Figure 4-2. Shelter Wall Repair Of Small Dent.
• Repair Of Large Or Deep Dent.
• Figure 4-3. Shelter Wall Repair Of Large Dent,
• Repair Of Small Skin Puncture Or Cut.
• Figure 4-4. Shelter Wall Repair Of Small Skin Puncture
• Repair Of Large Single Skin Puncture Or Cut.
• Repair.
• Figure 4-5. Shelter Wall Repair Of Large Skin Puncture Or Cut.
• Surface Preparation, Priming, And Painting
• Chapter 5 General Support Maintenance Instructions
• Appendix A References
• Appendix B Maintenance Allocation Chart
• Maintenance Functions
• Explanation Of Columns In Tools And Test Equipment Requirements, Section Iii
• Section Ii. Maintenance Allocation Chart
• Section Iii. Tool And Test Equipment Requirements
• Appendix C Components Of End Item And Basic Issue Items Lists
• Section Ii. Components Of End Item
• Section Iii. Basic Issue Items
• Appendix D Expendable/Durable Supplies And Materials List
• Section Ii. Expendable Supplies And Materials List (Cont)
• Index
• Index (Cont)
• Index (Cont)
• Index (Cont)
• The Metric System And Equivalents

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing