| |
Back
Station numbers | Up
Illustrator Draftsman 3 & 2 - Volume 2 Standard Practices and Theory | Next
Summary |
Blueprint Compositions, Continued
Finish marks
Finish marks show part surfaces that require finishing by machine.
Machining provides a better surface appearance and a better fit with closely
mated parts. Machine finishes are not the same as finishes of paint, enamel,
grease, chromium plating, and similar coatings. Finish marks appear on the
drawing near the surfaces to which they apply.
Notes and
Additional information that does not belong in a regimented information
specifications
block is included on drawings as notes and specifications. Place notes giving
clarifying information directly on the drawing with a leader line that ties into
the affected part or assembly. Specifications are statements containing a
description such as the terms of a contract or details of an object not shown.
Specifications provide additional information to show that the item conforms
to the description and that it can be made without the need for further
research, development, or design engineering.
Legends and
symbols
Legends and symbols explain and define special marks placed on the
drawing. Legends, if used, appear in the upper-right corner of drawings
under the revision block
Figure 1-43 is an example of a legend.
Figure 1-43.—A legend.
1-55
|
