Summary

Summary Review This chapter introduces you to various types of technical drawings. Beginning with a brief description of technical sketching and technical drawing followed by architectural/structural drawings, electrical/electronic drawings, machine drawings, and, finally, plumbing/piping drawings. Each section has a vocabulary and symbology that is unique. There are superficial directions on how the DM should approach each type of technical drawing and the significance of different drawings within each type. The chapter ends with hydraulic systems. Comments This chapter is not meant to be your sole reference to technical drawings. Before plunging in to draw, revise, or interpret each type of technical drawing, pull the appropriate references and study the symbols. As an Illustrator Draftsman, you may or may not have an opportunity to work on each of these types of technical drawings. You should, however, be familiar with the various types of technical drawings and know where to look for guidance in the event you are required to draw, revise, or interpret one. Opportunity abounds for well-versed draftsmen in the civilian community especially if you can compliment your knowledge and abilities with computer savvy. 4-68