| |
Back
Table coverings | Up
Illustrator Draftsman 1 & C - Volume 1 Equipment | Next
Lighting |
Furniture, Continued
Table coverings Apply new table coverings periodically and according to the following
(Continued)
procedures:
Cellulose acetate paper
Step
Action
1
Roll out and cut paper to fit table.
2
Wet paper and place on table.
3
Tape around table edges.
4
Paper will expand when wet and shrink when dry to fit tabletop.
CAUTION: This type of covering may snap smaller drafting tables or tables
not reinforced with internal rods.
Vinyl and Mylar
Step
Action
1
Roll out and cut vinyl/Mylar slightly larger than tabletop.
2
Allow vinyl/Mylar to lie flat for 24 hours before applying.
3
Lay vinyl/Mylar on table and trim to size.
4
Tape to table across the top of board only.
Continued on next page
2-7
|
