|
| |
Back
TERMINAL OBJECTIVE | Up
Engineering Symbology Prints and Drawings Volume 1 of 2 | Next
ENABLING OBJECTIVES (cont.) |
OBJECTIVES
DOE-HDBK-1016/1-93
Engineering Fluid Diagrams and Prints
ENABLING OBJECTIVES (cont.)
1.5
IDENTIFY the symbols used on engineering P&IDs for the following basic types of
instrumentation:
a.
Differential pressure cell
b.
Temperature element
c.
Venturi
d.
Orifice
e.
Rotometer
f.
Conductivity or salinity cell
g.
Radiation detector
1.6
IDENTIFY the symbols used on engineering P&IDs to denote the location, either local
or board mounted, of instruments, indicators, and controllers.
1.7
IDENTIFY the symbols used on engineering P&IDs for the following types of instrument
signal controllers and modifiers:
a.
Proportional
b.
Proportional-integral
c.
Proportional-integral-differential
d.
Square root extractors
1.8
IDENTIFY the symbols used on engineering P&IDs for the following types of system
components:
a.
Centrifugal pumps
b.
Positive displacement pumps
c.
Heat exchangers
d.
Compressors
e.
Fans
f.
Tanks
g.
Filters/strainers
PR-02
Page viii
Rev. 0
|
