|
| |
Back
Views and Perspectives | Up
Engineering Symbology Prints and Drawings Volume 1 of 2 | Next
Isometric Projection |
INTRODUCTION TO THE TYPES
DOE-HDBK-1016/1-93
Introduction To Print Reading
OF DRAWINGS, VIEWS, AND PERSPECTIVES
Figure 17 shows how each of the three views is obtained. The orthographic projection
is typically drawn to scale and shows all components in their proper relationships to each
other. The three views, when provided with dimensions and a drawing scale, contain
information that is necessary to fabricate or construct the component or system.
Figure 17 Orthographic Projections
PR-01
Rev. 0
Page 20
|
