|
| |
| Up
Engineering Symbology Prints and Drawings Volume 1 of 2 | Next
Figure 4 Switch and Switch Status Symbology |
Introduction To Print Reading
DOE-HDBK-1016/1-93
OBJECTIVES
TERMINAL OBJECTIVE
1.0
Given an engineering print, READ and INTERPRET the information contained in the
title block, the notes and legend, the revision block, and the drawing grid.
ENABLING OBJECTIVES
1.1
STATE the five types of information provided in the title block of an engineering
drawing.
1.2
STATE how the grid system on an engineering drawing is used to locate a piece of
equipment.
1.3
STATE the three types of information provided in the revision block of an engineering
drawing.
1.4
STATE the purpose of the notes and legend section of an engineering drawing.
1.5
LIST the five drawing categories used on engineering drawings.
Rev. 0
Page v
PR-01
|
